| Material Composition: | 3Y-TZP Zirconia (ZrO₂ + Y₂O₃ ≥ 99.5%) | Bulk Density: | 6.05 G/cm³ |
|---|---|---|---|
| Vickers Hardness: | 1250 - 1300 HV1 (88–89 HRA) | Fracture Toughness: | 8.0 – 10.0 MPa·m½ (Ceramic Steel Anti-Impact) |
| 3-Point Flexural Strength: | ≥ 1150 MPa | Compressive Strength: | ≥ 2100 MPa |
| Outer & Inner Diameter Tolerance: | ± 0.002 Mm (± 2 μm) | Pairing Clearance Fit: | 0.002 – 0.005 Mm |
| 0.002 – 0.005 Mm: | Ra ≤ 0.05 μm (Diamond Mirror Lapped) | Chemical Resistance: | PH 0 – 14 (Full Acid, Alkali & Salt Proof) |
Hunan Yuanhong New Materials — Precision Zirconia Ceramic Pump & Valve Specialist
Over a decade of specialized engineering in technical structural ceramics. Dedicated to sub-micron clearance ceramic plungers, diaphragm pump valve spools, cylinder sleeves, and wear-resistant bushings for global fluid handling and chemical metering equipment.
![]()
Key Selling Points
Selling Point 1 — Full Chemical Resistance Across pH 0–14 (Zero Metal Contamination)
Engineered using high-purity 3Y-TZP yttria-stabilized zirconia. Impervious to concentrated acids (HNO₃, HCl, H₂SO₄), strong alkalis, and saline slurries. Eliminates heavy metal ion leaching in pharmaceutical, cosmetic, and semiconductor high-purity fluid metering.
The outer plunger rod and mating cylinder sleeve are matched in pairs with an ultra-tight radial clearance of 0.002 to 0.005mm. The hydrodynamic fluid film provides a hermetic seal against leakage, completely eliminating elastomeric O-ring swelling and maintenance downtime.
Both the plunger sliding surface and internal sleeve bore undergo multi-stage diamond mirror lapping, achieving a mirror surface Ra ≤ 0.05 μm. Prevents particulate adhesion, reduces reciprocal driving torque, and eliminates galling or seizure even under unlubricated dry runs.
Utilizes stress-induced tetragonal-to-monoclinic phase transformation toughening. Absorbs intense mechanical impact and cyclic pressure shocks in high-pressure plunger pumps and diaphragm valves, completely resolving the brittle fracture vulnerabilities of alumina ceramics.
The plunger incorporates an integral T-head driving flange shaped via cold isostatic pressing (CIP) and precision ground. Seamlessly connects to actuator push-rods or stepper motor couplings, ensuring zero mechanical backlash and accurate displacement in precision dispensing.
Manufactured directly by Hunan Yuanhong New Materials. Full batch traceability from nanopowder CIP compaction to 1500°C sintering and diamond lapping. Complete dimensional CMM reports, dynamic clearance pairing records, and Material Test Reports (MTR) provided.
Technical Specifications & Tolerance Matrix:
Flanged Driving Cap:Integral CIP compaction with generous stress-relief neck radius, withstanding millions of high-frequency axial reciprocation cycles.
Centerless Ground Plunger Body:Cylindricity and runout ≤ 0.002mm along the entire stroke length, featuring a self-lubricating mirror finish.
Precision Honed Cylinder Sleeve:Sub-micron mating clearance achieving hydrodynamic liquid barrier sealing without elastomeric O-rings.
|
|
|
![]()